Long ISLAND CITY LOCKSMITH & DOORS
Call
Locksmith Service

Panic Bar & Exit Device Installation

Queens commercial properties — from the bustling restaurant rows of Jackson Heights to the warehouse corridors of Long Island City — depend on exit hardware that works every single time. A failed push bar on a busy Friday night isn't just a nuisance; it's a life-safety issue and a code violation that can shut your doors. Long Island City Locksmith & Doors supplies and installs panic bars and push-bar exit devices on commercial doors across Queens, dispatching trained, insured technicians directly to your location around the clock.

Call 718-593-4075Get a fast quote

Open 24 hours, 7 days a week · Licensed, bonded & insured

Whether you're opening a new storefront on Jamaica Avenue, upgrading aging hardware on a multi-tenant building in Astoria, or replacing a broken exit device on a Flushing warehouse loading door, we handle the entire job — hardware selection, fitting, alignment, and testing — without unnecessary damage to your door or frame. Call 718-593-4075 any time, day or night, and a mobile technician will come to you.

What we do

1

Available 24/7

Day, night, weekends and holidays — a real local locksmith answers and rolls a fully-stocked van.

2

Fast local response

Based in Queens, we reach the Queens area in well under an hour.

3

Insured & background-checked

Vetted technicians, up-front pricing, and no surprise add-ons when we arrive.

4

Damage-free entry

We pick and bypass locks the right way, so most lockouts are solved without drilling anything.

01

Why Panic Bar Installation Matters for Queens Commercial Properties

New York State and New York City building codes require approved panic hardware — also called exit devices or push-bar exit devices — on most commercial occupancy doors that serve ten or more people. In Queens, where mixed-use buildings, restaurants, retail shops, and light-industrial spaces sit side by side, the variety of door configurations is enormous: steel hollow-metal frames, aluminum storefront doors, heavy wood fire-rated assemblies, and everything in between. Installing the wrong device, or installing the right one incorrectly, creates both a safety hazard and a potential code-compliance problem during your next inspection.

Our locksmith technicians assess your specific door type, frame material, latch-bolt throw, and occupancy load before recommending hardware. We carry and install rim-mounted exit devices, surface-vertical-rod devices, concealed-vertical-rod devices, and — for higher-security applications — mortise lock exit devices that integrate a full mortise lock body with a panic-rated push bar. The result is a door that anyone can exit quickly in an emergency while remaining locked and secured from the outside.

Why Panic Bar Installation Matters for Queens Commercial Properties — Long Island city Locksmith & Doors
02

Panic Bar Replacement, Repair, and Upgrade Services We Provide

Exit devices take a beating. Delivery carts, hand trucks, and heavy foot traffic gradually wear out latches, push pads, pivot points, and through-bolts. When a panic bar feels loose, fails to retract its latch cleanly, or no longer aligns with the strike, the fix is rarely as simple as tightening a screw. Our technicians diagnose whether the issue is a worn internal mechanism, a misaligned strike, a sagging door, or a damaged case — and quote you the exact repair or panic bar replacement needed before touching anything. We stock common replacement parts and full replacement units on our service vehicles, so most repairs are completed in a single visit, including emergency calls in the middle of the night.

Upgrades are equally common. A Queens business expanding its operations, converting a storage area into an assembly space, or simply modernizing aging hardware may need to step up from a basic rim device to a panic bar with mortise lock functionality. A mortise lock panic bar combines the one-motion egress of a standard push bar with a multi-point locking mechanism — deadbolt, latchbolt, and sometimes an auxiliary lock — all driven from the same trim. We handle the door prep, the mortise pocket routing if needed, and the final function test so the device operates smoothly from both sides.

Mortise Lock Exit Devices: When and Why to Specify Them — Long Island city Locksmith & Doors
03

Mortise Lock Exit Devices: When and Why to Specify Them

Standard rim-mounted exit devices secure a door at a single point — the latch engages a rim strike mounted to the door frame. That's adequate for many applications, but higher-traffic or higher-security doors benefit from a mortise lock exit device, where the lock body is mortised into the door edge. A full mortise case provides a deadbolt, latchbolt, and sometimes an anti-pick guard in one housing, while the panic bar trim retracts all functions simultaneously from the inside. Von Duprin mortise lock exit device configurations, for example, pair a heavy-duty exit device trim with a standard mortise case, making them a popular specification for office buildings, schools, and medical facilities across Queens.

Because mortise lock exit devices require precise door-edge preparation — the mortise pocket must be cut to exact depth and width, and the strike plate must align perfectly — this is not a hardware swap that benefits from improvisation. Our skilled technicians bring the measuring tools, cutting equipment, and product knowledge to get the geometry right the first time. Proper installation also preserves your fire-door rating; an incorrectly fitted mortise lock can compromise the door assembly's UL listing, something Queens fire-safety inspectors look for specifically.

The Full Range of Commercial Door Hardware Services We Offer Queens Businesses — Long Island city Locksmith & Doors
04

Our Panic Bar Installation Process and What to Expect

When you call 718-593-4075, we gather the basics — door material, current hardware if any, address in Queens, and the urgency of the job — then give you an exact, up-front price before any work begins. The quote factors in the type of device being supplied, door prep required, time of day, and travel distance to your location. There are no surprise add-ons at the end of the job.

On arrival, the technician inspects the door, confirms measurements, and selects the correct backset and handed configuration for your specific frame. Existing hardware is removed cleanly; new through-bolts, sex bolts, or mortise screws are installed to manufacturer torque specs. The latch is aligned to the strike with shim adjustments as needed, and the push bar is tested for smooth, consistent operation — both panic push and outside lever or key cylinder function. For fire-rated doors, we document the hardware installed so you have a record for your building's maintenance file. The entire process is mobile: our van arrives equipped, and we don't need to haul your door anywhere.

Why Panic Bar Installation Matters for Queens Commercial Properties — Long Island city Locksmith & Doors
05

The Full Range of Commercial Door Hardware Services We Offer Queens Businesses

Panic bar and exit device work is one part of a broader commercial locksmith service we provide throughout Queens. Below is a representative list of what our technicians handle on commercial properties: new panic bar installation on single and double doors, panic bar replacement on worn or damaged units, panic bar repair including latch retraction failures and push-pad damage, mortise lock exit device installation, von duprin-style mortise lock configuration and installation, rim exit device installation, surface-vertical-rod exit device installation, concealed-vertical-rod exit device installation, electric strike integration with exit devices for access-control systems, electromagnetic door holder installation for fire-door hold-opens, door closer installation and adjustment to meet ADA swing-force requirements, commercial mortise lock installation and rekey, cylindrical lever lock installation on office and suite doors, high-security deadbolt installation, master key system design and implementation, commercial door frame repair and reinforcement, strike plate replacement and reinforcement, door hinge replacement and adjustment, storefront door lock installation and repair, sliding door commercial lock installation, bi-fold and pocket door hardware, keypad and electronic access control installation, push-pull paddle trim replacement, door coordinator installation on pairs of doors, and threshold and door sweep installation for fire-door compliance. If your Queens property has a door-hardware need not on this list, call us — our technicians handle a wide variety of custom and legacy hardware configurations.

Mortise Lock Exit Devices: When and Why to Specify Them — Long Island city Locksmith & Doors

Frequently asked questions

Answers to what our customers ask most. Still unsure? Just call.

How do I know whether my Queens commercial door needs a rim exit device or a mortise lock exit device?+

The right device depends on your door's construction, the level of security required, and your occupancy type. A standard hollow-metal single door in a low-traffic stairwell typically works fine with a rim-mounted exit device. Doors on office suites, medical facilities, or buildings requiring after-hours key access from the outside often benefit from a panic bar with mortise lock integration, because the mortise case provides a deadbolt in addition to the latchbolt — all retracted by one push of the bar. Our technician will assess your door on-site and explain which configuration meets both code requirements and your practical security needs before any hardware is ordered or installed.

What factors affect the cost of panic bar installation?+

Several things go into the final quote: the type and grade of exit device being supplied (rim, mortise, vertical-rod), whether door prep work like mortise cutting or strike reinforcement is needed, the material of the door and frame, the time of day you call (overnight and weekend visits are priced differently than standard business hours), and travel distance to your Queens location. We confirm an exact up-front price with you before any work starts, so there are no surprises when the job is done.

Can you install a panic bar on a glass storefront door?+

Yes. Aluminum-framed glass storefront doors are very common in Queens retail corridors and require specialized panic hardware with the correct backset and trim profile to fit the narrow stile. We carry and install exit devices designed specifically for these narrow-stile aluminum doors, including options with exterior key cylinders or access-control electric-strike setups. The installation requires careful measurement and the right handed configuration — our technician confirms all dimensions on-site before drilling or mounting anything.

My current push bar is stiff and the latch doesn't always catch — do I need a full panic bar replacement or just a repair?+

Not always a full replacement. Stiffness is often caused by a worn or dry pivot spring inside the push pad, and a latch that misses the strike is frequently a door-alignment issue rather than a hardware failure. Our technician will diagnose the root cause first. If internal components are worn beyond adjustment, we'll show you what's broken and quote the replacement part or, if the case is too far gone, a new unit. Because we stock common exit device components on our service vehicles, many repairs are completed the same visit without waiting on parts.

Do you work on panic bars outside of normal business hours?+

Yes — we operate 24 hours a day, 7 days a week, including holidays. A broken exit device is a safety issue that can't wait until Monday morning, and our Queens clients range from overnight restaurant managers to building superintendents dealing with 3 a.m. emergencies. Call 718-593-4075 any time and a trained, insured technician will be dispatched to your location. After-hours timing is one of the factors reflected in the up-front quote we confirm before starting work.

Will installing a new exit device damage my fire-rated door?+

When done correctly, no. Fire-rated doors must use panic hardware that is listed for use on fire-door assemblies, and the installation itself must not compromise the door's integrity — meaning no oversized cutouts, no uncovered penetrations, and hardware that matches the door's rated thickness. Our technicians are experienced with fire-door requirements and document the hardware installed so your building has a maintenance record. If an existing door has been improperly modified in the past, we'll flag that as a separate issue and explain what remediation would look like before proceeding.

Locked out or need a lock fixed? We are on the way.

718-593-4075Get a fast quote